Summer Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 60certs

HP HPE6-A71 Dumps

Page: 1 / 6
Total 171 questions

Aruba Certified Mobility Professional Exam Questions and Answers

Question 1

An administrator wants to implement AAA in an Aruba wireless environment that references two ClearPass servers for redundancy. To use these servers, what must the administrator create that will be referenced in the AAA profile?

Options:

A.

ClearPass Group

B.

Server matching rules

C.

Server Group

D.

Server Load Balancing

Question 2

An administrator needs to add connectivity between two buildings that are within 15 meters of each other on a company’s campus. The administrator decides to implement Aruba’s wireless mesh feature between an AP in each building. How should the administrator deploy the two APs to implement the mesh feature?

Options:

A.

one as a Mesh Portal AP and one as a Remote Mesh Point AP

B.

one as a Mesh Portal AP and one as a Mesh Point AP

C.

one as a Remote Mesh Portal AP and one as a Remote Mesh Point AP

D.

one as a campus AP and one as a Mesh Point AP

Question 3

Refer to the exhibit.

An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADIUS AAA server authentication clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2.

By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?

Options:

A.

The user's session remains active and RADIUS messages can still be processed between the S-UAC and AAA server.

B.

The user's session remains active, but the AAA server cannot implement RADIUS Change of Authorization (CoA).

C.

The user's session is disconnected and has to reconnect, but the S-UAC automatically updates the NAS-IP address on the AAA server to record the event.

D.

The user's session is disconnected and has to reconnect, and no record of this process is stored on the AAA server.

Question 4

Which configuration command needs to be executed on an Aruba Mobility Controller (MC) to forward AP statistical data to an AirWave Management Platform (AMP)?

Options:

A.

snmp-server

B.

tunneled-node-server

C.

ssh-server

D.

mgmt-server

Question 5

Refer to the exhibit.

A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user’s wireless session?

Options:

A.

The AP has reached the limit for number of users that are allowed to connect to the radio.

B.

The controller cannot reach the AAA server to perform the authentication.

C.

The user is configured for PEAP, but the WLAN profile on the controller implemented EAP-TLS.

D.

The user misconfigured the Managed Network Settings profile in Windows.

Question 6

A network of Mobility Controllers (MCs) is managed by a Mobility Master (MM). An administrator misconfigures the IP addressing on an MC and the MC loses connectivity to the MM.

How should the administrator fix this problem?

Options:

A.

Restore the previous configuration on the Mobility Master.

B.

Use the disaster recovery mode on the Mobility Master.

C.

Use the auto-recovery mode on the Mobility Master.

D.

Use the disaster recovery mode on the Mobility Controller.

Question 7

Which protocol is used to tunnel user traffic when an administrator implements tunneled mode between an ArubaOS-Switch and an Aruba Mobility Controller (MC)?

Options:

A.

IPSec

B.

AMON

C.

PAPI

D.

GRE

Question 8

An administrator wants to add a new folder in AirWave. Where would the administrator perform this action?

Options:

A.

in AMP Setup

B.

in AP/Devices

C.

in Groups

D.

in Device Setup

Question 9

A company network implements Skype for Business, where voice and video calls, desktop sessions, and file sharing sessions need to be prioritized. These applications are used across a wireless network, implemented with Aruba APs and Aruba Mobility Controllers (MC) that run ArubaOS 8.x.

Which Unified Communications and Collaboration (UCC) deployment mode should an administrator recommend for this customer?

Options:

A.

WMM-only

B.

SDN API

C.

Zones

D.

Heuristics

Question 10

Refer to the exhibit.

An administrator examines the configuration of an AP from apboot mode shown in the exhibit.

What can the administrator determine from the configuration?

Options:

A.

RAP terminated on a stand-alone controller.

B.

AP terminated on a non-cluster Mobility Controller.

C.

RAP terminated on a Mobility Master.

D.

AP terminated on a Mobility Controller in a cluster.

Question 11

Refer to the exhibit.

Which controller connection with the Aruba as the cluster leader?

Options:

A.

Controller A

B.

Controller B

C.

Controller C

D.

Controller D

Question 12

An administrator supports an Aruba wireless solution that uses ClearPass to implement server role assignment. A user reports that they are not able to access the correct department resources. The administrator determines from the connected controller that the user is associated to the login user profile instead of the department user profile.

What should the administrator examine on the ClearPass server to determine the Aruba VSA User Role value that ClearPass returns to the controller?

Options:

A.

Accounting

B.

Event Viewer

C.

Audit Viewer

D.

Access Tracker

Question 13

A guest establishes an authenticated wireless session to an Aruba Mobility Controller (MC). The controller uses a ClearPass server for all AAA functions.

Which AAA component disconnects the user when the guest exceeds their allowed duration?

Options:

A.

RADIUS Change of Authorization

B.

Active Directory Session Limits

C.

RADIUS Authorization Profile

D.

SNMP Disconnect

Question 14

Refer to the exhibit.

What is true about the configuration shown in the exhibit?

Options:

A.

This is an ArubaOS-Switch configured for per-user tunneled node.

B.

This is an ArubaOS controller configured for per-user tunneled node.

C.

This is an ArubaOS-Switch configured for per-port tunneled node.

D.

This is an ArubaOS controller configured for per-user tunneled node.

Question 15

Refer to the exhibit.

An administrator configures a policy for an AP Group. Port 3 of a RAP is a trunk that connects to a switch at a branch office. VLAN 1 is untagged and VLANs 10 (for data) and 11 (for voice) are tagged. The administrator applies an ACL inbound on Port 3 of the RAP.

How does this configuration affect traffic on Port 3?

Options:

A.

It filters traffic from VLAN 10 and 11, but allows traffic from VLAN1.

B.

It filters traffic form VLAN 1, but allows traffic from VLANs 10 and 11.

C.

It allows all traffic form VLANs 1, 10, and 11.

D.

It filters traffic from VLANs 1, 10, and 11.

Question 16

An administrator creates a cluster of four Mobility Controllers (MCs). When the administrator verifies the cluster operation, the administrator notices that it is operating as an L3-connected cluster.

What should the administrator do to ensure that the cluster operates as an L2-connected cluster? (Choose two.)

Options:

A.

Include all IP addresses in the same subnets shared by the Mobility Controllers.

B.

Exclude all VLANs that are not trunked to each Mobility Controller.

C.

Verify VLAN configuration on the switch trunks that interconnects the Mobility Controllers.

D.

Configure a separate VRRP group for each cluster member.

E.

Ensure that the controller IP addresses are in the same subnet.

Question 17

What are the responsibilities of a cluster leader in a cluster of Aruba Mobility Controllers (MCs)? (Choose two.)

Options:

A.

To identify primary and secondary Mobility Controllers for APs

B.

To create a table to determine how a wireless client maps to a cluster member

C.

To identify a backup cluster leader for redundancy

D.

To manage the configuration of cluster members

E.

To automatically load balance clients if the load across cluster members changes

Question 18

IEEE 802.11r relies on which technology to reduce re-authentication delays when clients roam between APs?

Options:

A.

Fast BSS Transition

B.

Temporal Key Integrity

C.

Robust Security Network

D.

Opportunistic Key Caching

Question 19

An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic. But, when users connect with their wired desktops, they have full access to corporate resources.

What must the administrator do to restrict desktop usage based on the users’ role assignment?

Options:

A.

Apply a server-derived role privacy to the RAP port.

B.

Identify the RAP port as untrusted.

C.

Implement ACLs on the RAP port.

D.

Implement per-user tunnel node on the RAP.

Question 20

Refer to the exhibit. What can the determined from the command shown in the exhibit?

Options:

A.

All the controllers run in standalone mode.

B.

MM2 is the Mobility Master.

C.

VRRP is used for Mobility Master redundancy.

D.

All the controllers run in a cluster.

Question 21

An administrator migrates Aruba Mobility Controllers (MCs) from ArubaOS.6x to ArubaOS.8. x. In the 6.x. configuration, the administrator configures GRE tunnels on the local controllers to a controller in the DMZ to keep guest traffic off the corporate network. The problem with the solution is that is creates suboptimal routing paths.

Which feature should the administrator implement to solve this problem?

Options:

A.

MultiZone

B.

Mobility

C.

Clustering

D.

AirMatch

Question 22

An administrator deploys Aruba Mobility Controller 7005s to a company’s branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.

Which controller command should the administrator use to implement this policy?

Options:

A.

no console enable

B.

no mgmt-user console

C.

mgmt-user console-block

D.

console disable

Question 23

When an administrator manually adds a Mobility Controller (MC) on the Mobility Master (MM) hierarchy, which parameters must be specified? (Select three.)

Options:

A.

IP address

B.

Device type

C.

MAC address

D.

Hostname

E.

Serial number

Question 24

An administrator needs to support Unified Communications and Collaboration (UCC) in a company’s network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications.

Which controller topology meets these requirements?

Options:

A.

Zones

B.

Standalone Mobility Controller

C.

Mobility Master-Mobility Controller

D.

Master-Local

Question 25

Refer to the exhibit.

An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?

Options:

A.

AP load balancing is enabled.

B.

User load balancing is enabled.

C.

This is an L2-connected cluster.

D.

This is an L3-connected cluster.

Page: 1 / 6
Total 171 questions