EMC DES-5221 Dumps

The router will form a successful adjacency with its 10.0.2.1 neighbor. The BGP state will be listed as connect.

The router will not form a successful adjacency with its 10.0.2.1 neighbor.

It will send gratuitous ARP messages to attempt to discover a route to its 10.0.2.1 neighbor.

It will send an ICMP packet to attempt to reach its 10.0.2.1 neighbor.

IGMP 1

IGMP 3

IGMP 2

IGMP snooping

Leaf

Leaf-spine

Spine

TRILL

NTP

DHCP

NPU

IP

ASBR-Summary (Type 4)

Summary (Type 3)

NSSA (Type 7)

Router (Type 1)

S2(config)# router bgp 64507

S2(config-router-bgp-64507)# peer-as 64507

S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown

S2(config)# router bgp 64507

S2(config-router-bgp-64507)# neighbor 192.168.32.1

S2(config-router-bgp-64507)# remote-as 64507 S2(config-router-bgp-64507)# update-source loopback 0 S2(config-router-bgp-64507)# no shutdown

S2(config)# router bgp 64507

S2(config-router-bgp-64507)# neighbor 192.168.32.1

S2(config-router-neighbor)# remote-as 64507 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown

S2(config)# router bgp 64507

S2(config-router-bgp-64507)# remote-as 64507

S2(config-router-bgp-64507)# neighbor 192.168.32.1 S2(config-router-neighbor)# update-source loopback 0 S2(config-router-neighbor)# no shutdown

Verify the VLT LAG ID is configured correctly on both VLT peers.

Enable RSTP on both VLT peers.

Use the show VLT detail and show VLT brief commands to view the VLT port channel status information.

Perform a mismatch check after the VLT peer is established.

Stub router and ABR

ABR and ASBR

Internal router and ASBR

Backbone router and Internal router

North-East

South-West

East-West

North-South