Summer Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 60certs

CWNP CWT-100 Dumps

Page: 1 / 2
Total 60 questions

Certified Wireless Technician Questions and Answers

Question 1

An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port. For most

enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?

Options:

A.

1

B.

3

C.

0

D.

2

Question 2

You have five APs and each AP has an average of 63 connected and active clients an any given moment.

Many users complain that throughput is poor on the WLAN. You use only channels 1, 6 and 11 in 2.4 GHz on

these APs and have configured them with a staggered channel plan. You are not using the 5 GHz radios

available in the APs. What action would have the most significant positive impact on performance?

Options:

A.

Install two more APs in the 2.4 GHz frequency band

B.

Enable the 5 GHz radios on all five APs

C.

Increase the output power on all five APs

D.

Change the channels to 3 and 7 on two of the APs

Question 3

When clients are using unacceptably low data rates for WLAN transmissions, what metric is too low?

Options:

A.

SNR

B.

Interference strength

C.

Noise floor strength

D.

MTU size

Question 4

What kind of authentication is used by WPA2-Enterprise implementations?

Select one:

Options:

A.

WEP

B.

Preshared key

C.

802.1X/EAP

D.

Passphrase

Question 5

What AP configuration option is often thought to provide security but actually provides no security because of

the simple spoofing attack weakens it?

Options:

A.

MAC filtering

B.

WEP

C.

Shared Key Authentication

D.

SSID hiding

Question 6

You are receiving reports from several users that their clients connect with very low data rates. All reports are

confined to a particular area in the facility and the users report that the problem does not occur with the same

devices in other areas. What is most likely problem in that area?

Options:

A.

High SNR

B.

Improper AP security configuration

C.

Poor signal strength

D.

Improper client security configuration

Question 7

You configured an AP for 802.1X/EAP authentication. You also configured several clients for the same. The clients cannot authenticate to the WLAN. When you look at the RADIUS server logs, you see that no

authentication attempts have been made. Other services use the same RADIUS server without problems. At what location should you check the configuration for errors?

Options:

A.

Clients

B.

AP

C.

None of these

D.

RADIUS Server

Question 8

When configuring an AP or controller, what is the collection of settings that define radio operations and the

parameters for the BSS?

Options:

A.

WLAN profile

B.

LAN configuration

C.

Admin account credentials

D.

WAN configuration

Question 9

What EAP method is supported on most operating systems without additional installation requirements?

Options:

A.

EAP-GTC

B.

EAP-FAST

C.

EAP-TLS

D.

LEAP

Page: 1 / 2
Total 60 questions